ALBA-MACREL Group S.L.

TVR/TVD MASONRY SAW

This model, besides the choice of two positions to set the head, depending on the disc diameter (300 mm or 350 mm), it also gives the possibility to set it vertical, thus allowing to cut thicks between 10 cm in two runs, or else to cut one piece in several runs.

The mitering operation con be performed at any angle between 0° and 45°, and the piece could equally rest at either side of the carriage, as this carriage has only one cutting slot. Also, its patented design allows to regulate it in height even when the head is in the mitering position.

Model	TVR-3M	TVR-4
Motor	Single phane -2Kw / 3CV	3 phase - 3Kw / 4CV
Voltage	230 V 50 Hz	400 V 50Hz
Nominal amperes	14 A	6,6 A
Disc´s R.P.M.	3000
Thermal protector	SÍ	Opcional
Cutting blade diameter	25,4 -300/350 mm.
Cutting blade diameter	75 - 100 mm.
Cutting max. Length	700 mm.
Right or mitre (thickness: 75mm)	600 mm.
Pitch between column and disc	330 mm.
Table dimensions	600 x 500 (mm. x mm.)
Water tank capacity	67 ℓ
Machine max. dimensions	1110 x 660 x 1300 (mm. x mm. x mm.)
Net weight	83 Kg.
Packing dimensions	1160 x 690 x 670 (mm. x mm. x mm.)

The TVD model put together all the advantages of TVR models, with larger dimensions and is fitted with a strong head and height regulation, which makes it suitable for accurate, spacially hard works with large pieces.

Model	TVD-90-3M	TVD-90-4	TVD-125-3M	TVD-125-4
Motor	Single phase	3 phase	Single phase	3 phase
Kw. - Cv	2Kw-3CV	3 Kw-4CV	2Kw-3CV	3Kw-4CV
Voltage	230V 50Hz	400V 50Hz	230V 50Hz	400V 50Hz
Termal protecteur	SÍ	No	SÍ	No
Cutting blade diameter	25,4-300 mm.		25,4-300 mm.	25,4-300/350 mm.
Cutting height	75 mm (300 Æ) single phase and 3 phase 100mm (350 Æ) 3 phase.
Cutting lenght	900 (mm.)		1400 (mm.)
Tilting table	0º-45º		0º-45º
Machine max. dimensions	1400 x 820 x 1080 (mm)		1695 x 730 x 1305 (mm)
Net weight	80 Kg.		153 Kg.
Packing dimensions	1430 x 550 x 570 (mms)		1800 x 900 x 850 (mms)

WOODEN CUTTING SAWS “TLE”

Whit “CE” certificate of type nº 119609ETM0110039902, as per Machine´s Directive 89/392/CEE.

Motor brake.

Widia cutting disc with cutting stopper.

Cutting slot and disc guard borders in plastic material.

Wheels for an easier movement of the saw.

Model	TLE-3M	TLE4
Motor	Single phase	3 phase
Kw-Cv	2,2 Kw-3CV	2,9Kw-4CV
Voltage	230 V-50 Hz	400 V-50 Hz
Disc. in-out diameter (mm.)	30 / 315
Max. Cutting height (mm.)	85
Machine max. dimensions (mm.)	700 x 980 x 940
Net weight (Kg.)	64
Packing dimensions (mm.)	750 x 970 x 360